Lose the bad vibes that hurt your tunes! Applied to body panels, Original
Dynamat reduces noise by 3 dB or more, effectively doubling your amplifier
power! A good choice for floors and doors, Original Dynamat is an asphalt based,
general purpose damping material. It weighs just .66 pounds per square foot, and
is 0.075" thick.
Since your music doesn't have to compete with as much ambient noise, you'll
hear subtle musical detail you hadn't heard before. Even if you have your stereo
turned off, you'll appreciate the difference Dynamat Original makes. The more
Dynamat you install, the more your car will sound and feel like a luxury
automobile. If you use a cellular phone while driving, you'll hear your calls
much better.
If you are a car audio fanatic, and you like your music LOUD, consider
Dynamat the foundation of your system. Loud music in a car can induce a lot of
vibrations on its own. So your Dynamat does double duty, damping road noise as
well as the panel vibrations caused by loud tunes.
Dynamat sheets are easy to cut, so you can apply them in all the odd-shaped
nooks and crannies your vehicle presents. Warming up Dynamat with a heat gun or
hair dryer during installation increases its flexibility and improves its
adhesion to the mounting surface.
Installation
- Clean mounting surface (bare metal)
- Using a razor knife or scissors cut
Dynamat to the desired size
- Heating the material before applying
is strongly recommended. This will increase the flexibility of the Dynamat
and make it adhere more easily to the surface.
- Bend the pad slightly and attach it
along its shortest edge
- Apply pressure, working Dynamat into
the contours of the vehicle body. This reduces the risk of leaving air
pockets, which reduce the sound damping capacity.
Special
Features
There is a high tack permanent
adhesive with a peel off plastic liner on the back of the Dynamat.
The material cuts
easily with scissors or a razor knife.
The surface is black and
paintable.
Specifications
- Temp Range: -30 to +350 degrees
- Damping loss factor: .08
- Weight LBS/SQ.FT: .66
|
