A Dynamat Speaker Kit transforms the flimsy sheet metal in your car door into
a solid, non-resonant baffle. You'll enjoy improved mid-bass performance with
less distortion.
High-performance Dynamat Xtreme is a patented, lightweight elastomeric butyl
and aluminum constrained-layer vibrational damper. It's lighter than Dynamat
Original, four times more effective, requires no heat to apply and is
recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is
coated with aluminum for high temperature areas such as firewalls and floors.
Contains two 10" x 10" pieces of Dynamat Xtreme (0.044"
thick). Ideal for mounting your speaker to a contoured metal surface like a car
door or rear deck lid.
Features
Dynamat Xtreme provides 4 times the
damping efficiency of Original Dynamat, the conforming ability of Premium
Dynamat, and the radiant energy reflection of Super Dynamat. Dynamat
Xtreme has an aluminum layer for high-temperature areas.
Mount the speaker as you normally would,
Dynamat Xtreme will create a seal and damp the door panel to
maximize the speaker's performance.
Use any excess Dynamat Xtreme to attach to the speaker
basket, thus cutting down on resonance.
There is a high tack permanent adhesive with a peel off plastic
liner on the back of the Dynamat Xtreme.
The material cuts
easily with scissors or a razor knife.
Dynamat Xtreme will increase the
mounting height and reduce mounting depth by .085".
It is used to install two speakers for maximum performance.
Installation
- Clean mounting surface (bare metal)
- Using a razor knife or scissors cut
Dynamat Xtreme to the desired size
- Apply Dynamat Xtreme, centering the
sheet over the speaker opening
- Apply pressure, working Dynamat
Xtreme into the contours of the door panel
- Using speaker hole as a guide, cut
away center portion of sheet
|
