Having a hard time hearing your car's sound system over the road noise?
Dynamat Xtreme keeps the noise out, so you'll hear more music using less power
— effectively increasing your amplifier's output! This sheet metal vibration
damping material (a butyl composite with a layer of aluminum) conforms and fuses
to automotive body surfaces such as floor pans and doors.
The 10455 bulk kit includes 9 sheets of Dynamat Xtreme, for a total of
about 36 square feet (a car door requires about 5 square feet). Designed
especially for high-temperature areas and high sound pressure level situations,
Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks
to its energy-reflective aluminum layer.
Features
Dynamat Xtreme: Dynamat Xtreme
provides 4 times the damping efficiency of Original Dynamat, the conforming
ability of Premium Dynamat, and the radiant energy reflection of Super Dynamat.
Dynamat Xtreme has an aluminum layer for high-temperature areas and requires
"no heat" for an easy, moldable installation.
Self-Adhesive Sheets: Each
sheet has a high-tack permanent adhesive with a peel-off plastic liner on the
back of the Dynamat Xtreme.
Easy-to-Cut Materials: All
materials cut easily with scissors or a razor knife.
Installation
Basic Installation Steps:
- Clean the mounting surface.
- Using a razor knife or scissors,
cut the Dynamat to the desired size.
- Remove the blue release liner from
the back of the Dynamat and apply to the mounting surface.
- Apply pressure, working the Dynamat
into the contours of the mounting surface.
- Work air out with a roller tool
(eliminating air pockets will ensure lasting adhesion of the Dynamat to the
surface, giving you maximum damping effect).
- Repeat the same process for each
sheet of Dynamat.
Dimensions
- Each Sheet: L=32",
W=18", Thickness=0.085"
|
