Back wave distortion, a common problem with
every speaker, occurs when your speaker sends the same sound out the back as it
does out the front! If this rear sound wave energy is allowed to bounce back and
return to the speaker, it interferes with the speaker’s ability to operate
properly causing back-wave speaker distortion. Dynaxorb eliminates back-wave
distortion using Sonic Stealth Technology™. Dynaxorb absorbs, diffuses and
attenuates the sonic energy directed towards it. Removing back-wave interference
from the speaker allows every speaker to produce the full quality potential it
was designed for, and delivers all the sound you paid for!
Dynaxorb
The Dynaxorb Pak contains two 6” x 6” Dynaxorb squares and a tube of
cyanoacrylate adhesive.
Contents: (2) 6" x 6" x
0..25" (154mm x 154mm x 6.35mm) Dynaxorb squares
Application: Use behind speakers mounted
in doors and tiled inside subwoofer enclosures. For optimal performance, apply
Dynaxorb over Dynamat Xtreme.
Description
Dynaxorb is black, energy absorbing, and sound diffusing advanced polymer
square. Dynaxorb eliminates Speaker Back-Wave Noise and Distortion. Dynaxorb
eliminates back-wave speaker distortion that colors sound and confuses imaging
by using a combination of energy absorbent material and the technology known as
“faceting”.
Acoustic Properties
Back wave distortion, a common problem with every speaker, occurs when your
speaker sends the same sound out the back as it does out the front. If this rear
sound wave energy is allowed to bounce back and return to the speaker, it
interferes with the speaker’s ability to operate properly causing back-wave
speaker distortion. Dynaxorb eliminates back-wave distortion using Sonic Stealth
Technology. Dynaxorb absorbs, diffuses and attenuates the sonic energy directed
towards it. Removing back-wave interference from the speaker allows every
speaker to produce the full quality potential it was designed for.
Applications
For automotive use, Dynaxorb is most effective when installed behind speakers
and inside subwoofer enclosures. When used with car speaker door installation,
install Dynaxorb to the panel directly behind the speaker. In subwoofer
enclosures, use multiple Dynaxorbs to line the enclosure wall that is directly
behind the subwoofers. For home/home theater use, use Dynaxorb behind in-wall
installation speakers and inside speaker and subwoofer cabinets. Lining Dynaxorb
behind in-wall speakers will not only eliminate back-wave speaker distortion it
will also decouple the sonic energy from the in-wall speaker reducing the
unwanted sound radiated through the wall into the adjacent room.
Installation
Dynaxorb comes in 6” x 6” squares and can be used individually with smaller
speakers or tiled together to line the opposing wall inside subwoofer
enclosures.It can be easily attached to any given substrate with a cyanoacrylate
adhesive. Dynaxorb can be trimmed to fit using a knife or scissors. Remove dust,
grease, moisture and other foreign matter from the application surface. For best
results, treat the area behind the speaker with Dynamat Xtreme then install
Dynaxorb directly over the Dynamat.
Specifications
Appearance:
Black, advanced polymer square
Thickness:
¼” (6.35mm)
Weight:
0.34 lbs. per 6-1/16” square
(168 g per 154mm square)
Hardness:
<10 Shore A
Density:
69.6 lbs./ft3
(1120 kg/m3)
Rebound Resilience:
<15%Tensile Strength
Water Absorption:
None
Storage:
Store in a cool dry place
>Recommended Adhesive:
Cyanoacrylate adhesive
Coverage:
0.26 ft2 (0.024m2)
Weight:
0.34 lbs (168 g)
Dimensions:
6-1/16” x 6-1/16”
(154mm x 154mm)
|
