A beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-3200T is a huge value in a small package.

300-Watt Max Power
Anybody have a problem with more power? We didn't think so. The GM-3200T packs an impressive wallop despite its small size, with 300-watt max power capability. It can run 60 watts x 2 at 4 ohms, 150 watts x 1 at 4 ohms, or 75 watts x 2 at 2 ohms — whichever best fits your system configuration.

Built-In Crossover (80Hz Low-Pass Filter)
Built into the GM-3200T is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system's efficiency and delivers the best possible sound quality.

Speaker Level Inputs
What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The GM-3200T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) to the GM-3200T without having to buy add-on adapters. SO, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.

Features:

• Bridgeable: Yes
• Channel # Capability: 1/2
• Screw-Type Speaker Terminals: Yes
• Balanced Isolator Input Circuit: Yes
• RCA Inputs: 2 Channel
• Speaker Level Input: 2 Channel
• Input Level Control: Hi-Volt (400mV ~ 6.5v)
• Built-in Crossover: Selectable LPF
• Crossover Frequency Range: 80Hz, -12dB/Oct.
• Warranty: 1 Year

CEA 2006 Specifications:

• Output Power (4 Ohm, <=1% THD): 60 Watts RMS x 2 
• Output Power (4 Ohm Bridged, <=1% THD): 150 Watts RMS x 1
• Output Power (2 Ohm, <=1% THD): 75 Watts RMS x 2
• Signal to Noise (1 Watt into 4 Ohms): 80 dBA
• Dynamic Power (4 Ohm): 60W

Specifications:

• Peak Music Power: 300 Watts
• Number of Channels: 2
• Load Impedance Capability: 2~8 Ohm (Stereo), 4~8 Ohm (Bridged)
• Continuous Power (4 ohm): 60W x 2
• Continuous Power (2 ohm): 75W x 2
• Continuous Power Bridged (4 ohm): 150W x 1
• Frequency Response: 10Hz ~ 50 kHz
• Total Harmonic Distortion: 0.008%
• Signal-to-Noise Ratio: >100dB
• Dimensions: 11-13/16" x 2-3/8" x 7-11/16"